NFC Demo App by SIC Apk 1.23

The NFC applications on the smartphones.

This application is used to demonstrate SIC4310 NFC Enabler development kits developed by Silicon Craft Technology Ltd. (SIC). The NFC Enabler (SIC4310) is a dual-interface ISO14443A RFID tag, interfacing with both RF and UART. NFC Enabler is designed to be used in a various types of applications such as home appliances, personal healthcare, sport and fitness devices, etc. The key challenge is to deploy a low-cost NFC tag instead of an expensive full functional reader IC and use smartphones as a hub of information. As a result, this concept will enable a tremendous number of NFC applications on the smartphones.

See demos on our YouTube channel at https://www.youtube.com/user/SiliconCraft

Main features of SIC4310

- RF interface based on ISO14443A at 106 kbps

- UART interface 9600 to 115200 bps

- 8 programmable GPIOs

- Activity indicator pins (RF detection, RF busy and power ready)

- 228-byte EEPROM accessible from RF and UART

NOTE:

The application only supports NFC Enabler SIC4310 ICs from Silicon Craft Technology.

The demo applications are as follows.

1. GPIOs control

2. LEDs control

3. Firmware upgrade through NFC

4. LCD control

5. Temperature sensor

6. File transfer

7. SIC commands

8. Melody

9. Interactive poster

10. E-ink Camera

11. Room Controller

12. NDEF editor

The development kits are provided in five different forms.

1. SIC4310-MC: a 12.5 x 19.7 mm micro module with a UART interface and 4 GPIOs

2. SIC4310-USB: a 12.5 x 37.3 mm tiny module with a USB interface

3. SIC4310-HV: an energy harvesting module with a UART interface and 3 GPIOs. The on-board inductive antenna can generate a current up to 10 mA.

4. SIC4310-HVU: an energy harvesting module featuring UART and USB interfaces and two LEDs that can be controlled via GPIO pins. The on-board inductive antenna can generate a current up to 10 mA.

5. SIC4310-FU: 47.6 x 107.9 mm ready-to-use kit featuring ARM Cortex M0 MCU, SIC4310, LCD, inductive antenna, two function buttons, temperature sensor, and connectors (I2C, SPI, UART, programming and debugging)

6. SIC4310-SP: a customizing board as e-ink, springboard etc.

Please contact [email protected] if you have problems or feel free to contact us if you have any suggestions for additional features. This helps us to detect, analyze and fix possible issues you may encounter when using our demo application.

Version 1.0

Updated on Aug 26, 2013

Version 1.01

Updated on Aug 28, 2013

Version 1.02

Updated on Sep 2, 2013

Version 1.03

Updated on Sep 6, 2013

Version 1.04

Updated on Sep 12, 2013

Version 1.05

Updated on Sep 22, 2013

Version 1.06

Updated on Oct 14, 2013

Version 1.07

Updated on Oct 18, 2013

Version 1.08

Updated on Oct 28, 2013

Version 1.09

Updated on Dec 12, 2013

Version 1.10

Updated on Jan 13, 2014

Version 1.11

Updated on Jan 17, 2014

Version 1.12

Updated on Mar 21, 2014

Version 1.13

Updated on Apr 29, 2014

Version 1.14

Updated on May 5, 2014

Version 1.15

Updated on May 8, 2014

Version 1.16

Updated on May 9, 2014

Version 1.17

Updated on Jun 12, 2014

Version 1.18

Updated on Jun 26, 2014

Version 1.19

Updated on Jul 2, 2014

Version 1.20

Updated on Jul 18, 2014

Version 1.21

Updated on Aug 28, 2014

Version 1.22

Updated on Sep 9, 2014

What's New in the Latest Version 1.23

Last updated on Aug 5, 2015 Version 1.23 release
+ Fixed some bugs.
+ Added Multi-NDEF Editor new version.

Version 1.22 release
+ Fixed some bugs.
+ Optimized timeout in Bootloader app.
+ Expanded a buffer of storing HEX file.

Version 1.21 release
+ Expanded timeout in Bootloader apps's erase mode.

Version 1.20 release
+ Fixed some bugs in Multi-NDEF Editor apps.

Version 1.19 release
+ Fixed some bugs in Multi-NDEF Editor & SICCommands apps.